19432101 Chevrolet Performance SP350

Description

19432101 Chevrolet Performance SP350 Base Crate Engine Replaces 19333157, 19417624, 19417781, 19417618
385 HP 350 Modern Street Performance in a Classic Small-Block Package

Will be replaced by 19433039 when PN 19432101 sells out.

Our new SP350 crate engine incorporates modern technologies such as a beehive-type valve springs to take the
classic 350 Small-Block to new levels of high-rpm performance – without sacrificing the signature torque that has
made it the benchmark of V-8 engines for nearly half a century.
In fact, the 385 hp rating of the engine is complemented by excellent low-rpm torque, with the SP350 generating
405 lb.-ft. of torque at 3,600 rpm. It’s all due to the high-flow, lightweight aluminum cylinder heads. They’re based
on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. The beehive valve springs
enable greater high-rpm performance and durability, allowing the engine to rev higher to make the most of every
cubic foot of air drawn through it.
As with all of Chevrolet Performance’s Small-Block crate engines, the SP350 is built with a cast-iron block with
four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and durable, highsilicon
pistons. In this value-driven Base crate engine package, it also includes the intake manifold, distributor, water
pump, damper and flexplate. Other accessories are required to finish it

• Cast-Iron Block, with 4-Bolt Mains
• Lightweight “Fast Burn” Aluminum Cylinder Heads for Optimal Air Flow
• Dual-plane aluminum intake provides street-friendly operation
• 210cc Intake Runners and 2.00"/1.55" Valves
• 62cc Combustion Chambers – 9.6:1 compression
• Hydraulic Steel Roller-style Camshaft with .474"/.510" Lift
• Cam duration at .050": 208° Intake / 221° Exhaust
• 375 Horsepower and 405 lb.-ft. Torque
• The Base package includes an aluminum intake manifold, distributor, water pump, damper, flexplate and more.

SP350/375 BASE TECH SPECS
Part Number: 19333157
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10105123): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12556307): Forged steel
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Hydraulic roller
Camshaft Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1 nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: 93 octane
Ignition Timing: 36 degrees total at 4,000 rpm
Maximum Recommended rpm: 5800
Balanced: External

NOTE: Distributor with melonized steel gear MUST be used with longblocks and Partial engines with steel camshafts, or engine damage will occur

SP350/375 Base